分析再热器超温爆漏与水冷壁结焦控制量的关系

文章介绍了宝钢自备电厂在改善锅炉燃烧工况，控制锅炉水冷壁结焦所采取的技术措施，分析了锅炉水冷壁结焦量与锅炉二次再热器烟气出口平均温度的关系，为解决锅炉水冷壁结焦所引发的二次再热器超温爆漏问题提供了依据。     

焊接铁网石箱(GABION)挡土墙设计与施工

焊接铁网石箱是采用镀锌的轻质铁线和先进的焊接工艺制造而成，可用于水利、公路、建筑工程。本文就焊接铁网石箱在水利工程挡土墙中的应用设计、制造工艺以及施工方法进行了详尽地介绍。     

高压喷射注浆造防渗墙法在防洪工程中的应用

以景德镇城市防洪工程为例，对各种防渗方案进行了比较，阐述了高压喷射注浆造墙法适用的地质条件，以及控制工程施工质量的措施。     

高喷防渗墙在七一水库大坝防渗处理中的应用

本文针对七一水库大坝及坝基渗漏问题,阐述了高喷注浆防渗墙的设计、施工,并通过围井试验检查及大坝浸润线对比,检验了高喷防渗墙的防渗效果.     

特大型地下厂房岩壁梁锚杆和混凝土施工技术及质量控制

岩壁梁是一种新型结构，为通过一定深度的锚杆将钢筋混凝土梁固定在地下厂房两侧的岩壁上，而吊车荷载则通过锚杆和钢筋混凝土与岩石接触面的摩擦力传到岩体上，形成岩壁梁和岩体共同受力的结构。岩壁梁是地下厂房施工和运行的核心建筑物，岩壁梁锚杆和混凝土的施工质量是直接关系到岩壁梁成败的关键，所以施工技术和施工质量均要求极高，是地下厂房系统施工的重点和难点。本文介绍了瀑布沟水电站地下厂房岩壁梁锚杆和混凝土施工的关键技术及质量控制经验，可供同类工程借鉴参考。     

隔壁精馏塔分离芳烃混合物的模拟研究

采用隔壁精馏塔分离苯-甲苯-对二甲苯物系,用Aspen Plus软件模拟了隔壁精馏塔内温度分布及液相组成分布,考察了汽相和液相分配比对产品纯度的影响。对隔壁精馏塔模拟得到的优化操作条件为:隔壁精馏塔的理论板数为30块,侧线采出在第14块理论板,进料段为15块理论板,在进料段的第7块理论板进料,进料组成n(苯)∶n(甲苯)∶n(对二甲苯)为1∶3∶1,回流比为8.8,液相分配比为2.96,汽相分配比为0.83。在此条件下,各组分的摩尔分数大于98.5%,与实验结果基本吻合。当进料组成n(苯)∶n(甲苯)∶n(对二甲苯)为1∶3∶1时,采用隔壁精馏塔可比常规两塔流程节能27.18%。     

人工深水湖渗流场及防渗方案三维仿真模拟研究

郑州市郑东新区龙湖规划水面面积为6．08km^2，为我国最大的城市人工湖。因其成湖地层主要为细砂，其建设存在开挖施工防渗、成湖后的有限防渗、地下水交换，以及防止周边地区浸没、盐渍化等问题。应用三维渗流有限元法数值模型对龙湖工程施工和运行期防渗方案进行了模拟仿真计算，给出了工程区地下水位、渗漏量、渗透坡降、渗流场的变化以及优化防渗方案。     

公伯峡水电站土石围堰防渗布置与施工

公伯峡水电站土石围堰布置5种防渗型式，分别是沥青防渗墙，现浇混凝土防渗，粘土心墙，土工膜防渗和高压旋（摆）喷混凝土防渗墙。通过对不同类型防渗墙的施工方法，施工程序和防渗效果的比较，可为其他类拟工程的防渗设计及其施工提供参考。     

Cyclic variations in the permeability of the cell wall of Saccharomyces cerevisiae.

To study cell-cycle-related variations in wall permeability of Saccharomyces cerevisiae, two approaches were used. First, an asynchronous culture was fractionated by centrifugal elutriation into subpopulations containing cells of increasing size. The subpopulations represented different stages of the cell cycle as judged by light microscopy. Cell wall porosity increased when these subpopulations became enriched with budded cells. Secondly, synchronous cultures were obtained by releasing MATa cells from alpha-factor induced G1-arrest. These cultures grew synchronously for at least two generations. The cell wall porosity increased sharply in these cultures, shortly before buds became visible and was maximal during the initial stages of bud growth. It decreased in cells which had completed nuclear migration and before abscission of the bud had occurred. The porosity reached its lowest value during abscission and in unbudded cells. We examined the incorporation of mannoproteins into the wall during the cell cycle. SDS-extractable mannoproteins were incorporated continuously. However, the incorporation of glucanase-extractable mannoproteins, which are known to affect cell wall porosity, showed cyclic oscillations and reached its maximum after nuclear migration. This coincided with a rapid decrease in cell wall porosity, indicating that glucanase-extractable mannoproteins might contribute to this decrease.     

浅谈赣抚大堤樟防1标射水造墙的接缝技术和处理措施

介绍射水造墙的接缝原理，并把自己在施工过程中为确保接缝质量达到设计要求而总结出一些经验和处理措施提出为一起探讨。